Bookmark and Share
Interior Accessories

We've compiled the industry's most unique and hard-to-find automotive interior accessories. This page is all about holders and trays for: food, drinks, smartphones in particular iDevices. Most are limited edition so fetch them quick and buy multiple units for your friends/family before these items are gone forever. Enjoy.

WARNING: Most items are designed for the Japan domestic market (hence the name JDM) only. We cannot guarantee 100% compatible with non-JDM vehicles. Special order items like these have no return policy. Buyer beware.

  > TO ORDER: Either click on ADD buttons here or be directed to individual product pages.
 



 Universal 

  • Rear Seat Tray w/ LED, Big - This tray hooks onto the back of the headrest on your front seat and has enough real estate for a full take-out meal. You may use it for an ultraportable notebook / smartphone / iPad too. It even has an LED light for night time use. Measures 210H x 350W x 35D mm. Weight: 480g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Rear Seat Leather Tray w/ LED - This genuine leather tray goes well with your luxurious leather seats. It hooks onto the back of the headrest on your front seat and has enough real estate for a full meal. You may use it for an ultraportable notebook / smartphone / iPad too. It also has a white LED light for night time use. 2x AA batteries not included. Measures 230H x 350W x 30D mm. Weight: 720g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Steering Wheel Table - Convert your steering wheel into a working table for food or laptop or iPad use. There is even a mobile phone mesh pocket built-in. Maximum load is 1.5kg. Fits over steering wheel of 35~38cm in diameter. Measures 185H x 345W x 15D mm. Weight: 270g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Cup Holder Tray, Large - Insert this tray into any of your cup holders and make a practical area out of it without losing any cup holding capability. It accommodates up to 500mL canned or rectangular carton drinks, plus a flat bed for your smartphone. The notch / opening allows the phone's charging cable to exit. Measures 105H x 245W x 90D mm. Weight: 195g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Cup Holder Tray, Small - Insert this tray into any of your cup holders and make a smartphone charging station out of it. Multiple notches / openings allow the phone's charging cable to exit. Good for other loose items too. Measures 100H x 155W x 75D mm. Weight: 115g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Cup Holder Phone Caddy - Insert this tray into any of your cup holders and make a standup smartphone charging station out of it. An opening to allow the phone's charging cable to exit. Soft material dampens vibration and protect both your phone and the cup holding area. Measures 100H x 107W x 140D mm. Weight: 119g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Tablet Headrest Holder - Attach this to the back of the headrest and have an eye-level tablet mount instantly. It protects the equipment and its screen. Very flexible mounting techniques including angle adjustment, vertical and horizontal levels. Works with many tablet models including the iPad. Measures 280H x 205W x 15D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Smartphone Cup Holder - Insert this into any cup holders and have a smartphone holder instantly. Fits iPod/iPhone and most smartphones. Bottom fins are made of soft flexible material so it fits cup holder snugly. Measures 115H x 86W x 86D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Smartphone Holder w/ Dashtop Suction - The Japanese have shied away from suctioning anything onto the windshield these days where gravity always acts against it, but instead they suction onto the dash where gravity acts for its stability. This holder fits any smartphone models between 35~80mm in width (that includes iPod / iPhone) and 160g or lighter in weight. In the event that your dashboard has an uneven texture, it includes a smooth plate to counter that too. Adjustable 3-dimensionally: 360° Z-axis rotation, 360° Y-axis rotation, 180° tilt. Measures 100H x 67W x 107D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Smartphone Holder w/ Dashtop Suction - Just like the above model but instead of 2 mounting points, this one has 3. This holder fits any smartphone models between 55~70mm in width and 160g or lighter in weight. In the event that your dashboard has an uneven texture, it includes a smooth plate to counter that too. Adjustable 3-dimensionally: 360° Z-axis rotation, 360° Y-axis rotation, 180° tilt. Measures 120H x 97W x 100D.
  • - 2~4 weeks for JDM delivery       
     
     
  • BT Cord Reel - Mount your bluetooth headset and microphone/charger cable onto this mount that can be positioned either horizontally or vertically. Uses double-sided tape. Measures 19H x 68W x 21D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Reel SS Micro USB Charger - A single push of the button winds this micro USB cable (100cm) back into its casing. LED indicates power status. Power: DC12V. Output: DC5.0V/500mA. Operating temp: 0~45°C. Measures 120H x 42W x 28D mm. Weight: 37g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Reel Micro USB 1.2A Charger - A single push of the button winds this micro USB cable (70cm) back into its casing. LED indicates power status. Power: DC12V. Output: DC5.3V/1.2A. Operating temp: 0~45°C. Measures 26H x 52W x 129D mm. Weight: 57g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Direct Twin Socket microUSB Charger - Plug this charger directly into your cigarette socket to generate two empty 12V sockets, plus a 5V microUSB to charge your smartphone. Cord length is 0.6m and is attached to an integrated cord reel which all can be hidden within the charger when not in use. 10A fuse. Measures 37H x 88W x 130D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Remote Twin Socket microUSB Charger - Note that this charger has a corded adapter unlike the above model that has a fixed one. This enables you higher flexibility on mounting locations. Plug this charger into your cigarette socket to generate two empty 12V sockets, plus a 5V microUSB to charge your smartphone. Cord length is 0.6m and is attached to an integrated cord reel which all can be hidden within the charger when not in use. 10A fuse. Measures 37H x 88W x 52D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Suction Base - A strong vacuum suction base that allows you to mix-n-match with the same series' many choices (see below) to hold various devices. Measures 132H x 73W x 73D mm. Weight: 114g. Made in Japan.
  • - 2~4 weeks for JDM delivery       
     
     
  • Camera Holder - To be used with the above Suction Base. This holder attaches to digital camera or camcorder that is 500g or lighter. Measures 50H x 38W x 42D mm. Weight: 27g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Navigation Device Holder - To be used with the Suction Base. This holder attaches to GPS device that is 35mm thick or less, 85~110mm width, 550g or lighter. Infinite angle adjustment in all 4 directions. Measures 95H x 89W x 40D mm. Weight: 37g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Smartphone Holder - To be used with the Suction Base. This holder attaches to smartphone that is 22mm thick or less, 46~68mm length, 170g or lighter. Infinite angle adjustment in all 4 directions. Measures 57H x 89W x 40D mm. Weight: 34g.
  • - 2~4 weeks for JDM delivery       
     
     
     iDevices use 

  • iPhone Holder w/ Lens - To be used with the Suction Base. This holder has an integrated 120° wide-angle lens and attaches to the iPhone (3G/3GS/4). Measures 70H x 124W x 41D mm. Weight: 56g.
  • - 2~4 weeks for JDM delivery       
     
     
  • iPad Holder Cup Base - Insert into any compatible vehicle cup holder to make an iPad base. Requires an iPad holder (see below) to function. Measures 275H x 80W x 80D mm. Weight: 197g. Made in Japan.
  • - 2~4 weeks for JDM delivery       
     
     
  • iPad Headrest Holder Base - Mount this to the back of the headrest to make an iPad mounting base. Requires an iPad holder (see below) to function. Measures 52H x 235W x 145D mm. Weight: 218g. Made in Japan.
  • - 2~4 weeks for JDM delivery       
     
     
  • iPad A/C Holder Base - Attach this to any A/C vent to make an iPad mounting base. Requires an iPad holder (see below) to function. Measures 101H x 56W x 81D mm. Weight: 108g. Made in Japan.
  • - 2~4 weeks for JDM delivery       
     
     
  • iPad Over-Dash Holder Base - Attach this to a flat dashtop to make an iPad mounting base. While gravity is the worst enemy for window suction cups, the opposite is true for this dashtop suction cup. Requires an iPad holder (see below) to function. Measures 46H x 74W x 255D mm. Weight: 380g.
  • - 2~4 weeks for JDM delivery       
     
     
  • iPad Holder - Finally, this is the iPad Holder that we have been teasing you with. Attach this to any of the above Holder Bases to form a cradle for your iPad. Actually, it fits the Samsung Galaxy Tab too. Or any tablet that falls within the following dimensions: 190~247mm H x 120~194mm W x 15mm thickness or less. Max. weight capacity: 850g. Measures 190H x 131W x 47D mm. Weight: 203g.
  • - 2~4 weeks for JDM delivery       
     
     
  • iPhone Holder w/ Dashtop Suction - The Japanese have shied away from suctioning anything onto the windshield these days where gravity always acts against it, but instead they suction onto the dash where gravity acts for its stability. This kit fits the latest iPhone models and in the event that your dashboard has an uneven texture, it includes a smooth plate to counter that too. Adjustable 3-dimensionally: 360° Z-axis rotation, 360° Y-axis rotation, 180° tilt. Measures 120H x 65W x 100D.
  • - 2~4 weeks for JDM delivery       
     
     
  • FM Transmitter for iPad - A high quality FM trasmitter that allows you to listen to music on your iPad via your car speakers in frequencies of: 88.3, 88.5, 88.7MHz. Charges iPod/iPhone/iPad too with 700mA ~ 1A output. Cord length: 1.2m. Power: DC12V. Operating temp: 0~45°C. Measures 20H x 37W x 116D mm. Weight: 66g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Dual USB Socket for iPad - Dual USB sockets for iPod / iPad use. Power: DC12V. Operating temp: 0~45°C. Measures 28H x 28W x 98D mm. Weight: 38g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Trio USB Socket for iPad - Tri USB sockets for iPad & smartphone use. Power: DC12V. Output: 500mA ~ 1A. Flat cable allows ashtray lid / drawer to be closed even while plugged in. Operating temp: 0~45°C. Measures 18H x 93W x 53D mm. Weight: 85g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Reel Charger for iPad - A single push automatically winds this cable (70cm) back into its casing. LED indicates power status. Charges iPod / iPhone / iPad. Power: DC12V. Output: DC5.3V/1A. Operating temp: 0~45°C. Measures 26H x 52W x 129D mm. Weight: 61g.
  • - 2~4 weeks for JDM delivery       
     
     
  • Direct Twin Socket iPhone Charger - Plug this charger directly into your cigarette socket to generate two empty 12V sockets, plus a 5V connector to charge your iPod/iPhone. Cord length is 0.6m and is attached to an integrated cord reel which all can be hidden within the charger when not in use. 10A fuse. Measures 37H x 88W x 130D.
  • - 2~4 weeks for JDM delivery       
     
     
  • Remote Twin Socket iPhone Charger - Note that this charger has a corded adapter unlike the above model that has a fixed one. This enables you higher flexibility on mounting locations. Plug this charger into your cigarette socket to generate two empty 12V sockets, plus a 5V connector to charge your iPod/iPhone. Cord length is 0.6m and is attached to an integrated cord reel which all can be hidden within the charger when not in use. 10A fuse. Measures 37H x 88W x 52D.
  • - 2~4 weeks for JDM delivery       
     
     


    Home Misc. Interior :  

    © Sigma Automotive - 267-645-6340 (fax)
    Home  |  Order Info  |  View Cart  |  Contact  |  Bookmark and Share


    Affiliated Sites:
      [  BOSSBi  |  Earthority  |  SigmaAuto  ] 

    See Us On:
    Facebook     MySpace     Twitter     YouTube