Bookmark and Share

Protect yourself from the cell phone radiation emitted from the antenna (internal or external) of your mobile phone with the SAR Shield radiation shield. Electromagnetic radiation EMF has been proven to be harmful. SAR Shield is the only cellular radiation shield to be tested using FCC SAR testing protocols. Safety is accomplished by dissipating deadly cancer causing electromagnetic radiation by up to 89%. Eliminate the dangers today! Available for phones with and without antennas.

The number of scientists warning manufacturers, the media, and governments of the health dangers caused by electromagnetic pollution is continually increasing. This has now reached the point where the Cellular Telecommunications Industry Association will start publishing information on the amount of radiation that enters users' heads when they use various wireless phones by requiring manufacturers to submit data -- called SAR's for "Specific Absorption Rate" of radiation. The information will be included in the product literature inside cell phone packaging. The reason for the publication of SAR's on the packaging of cellular phones is due to the growing public pressure on cell phone safety. George Carlo, a public health researcher who spearheaded a three-year, $27 million research program for the cellular telephone industry on possible health risks associated with such devices said in his report that the radio frequency radiation from wireless phone antennae "appears to cause genetic damage in human blood," while another case study uncovered a "statistically significant increase" in neuro-epithelial brain tumors among cell phone users.

"The public wants to know, and a couple of months ago a blue ribbon panel set up by the British government said outright this information should be on the box. So there is growing pressure worldwide to make this information available to consumers," -Louis Slesin, editor and publisher of Microwave News speaking to CNN.

What many cell phone users may not know is that cell phones send electromagnetic waves into users' brains. In fact, every cell phone model sold in the United States has a specific measurement of how much microwave energy from the phone can penetrate the brain. Depending on how close the cell phone antenna is to the head, as much as 60 percent of the microwave radiation is absorbed by and actually penetrates the area around the head, some reaching an inch to an inch-and-a-half into the brain.

"This is the first generation that has put relatively high-powered transmitters against the head, day after day," says Dr. Ross Adey, who has worked for industry and government for decades studying microwave radiation, and is one of the most respected scientists in the field. Tests conducted by the ABC show 20/20 have found that some of the country's most popular cell phones can - depending on how they're held - exceed the radiation limit. 20/20 reported that government-testing guidelines are so vague that a phone can pass the Federal Communications Commission's requirements when tested in one position and exceed those maximum levels when held in another position.

Experts say it's particularly hard to predict the long-term impact of a product that's just two decades old, especially since most of the 95 million Americans who now have cell phones began using them in the past five years.

SAR Shield dissipates high frequency electromagnetic energy. Attenuating the electromagnetic field by up to 89%. The biological effects on the user, and anyone standing nearby are greatly reduced, below levels that are considered dangerous by the FDA. In reducing the levels of radiation SAR Shield reduces the suspected effects that exposure to intensive levels of high frequency electromagnetic energy cause, such as, loss of memory, Parkinson's, Alzheimer, Leukemia, headaches, and brain tumors. SAR Shield has been independently tested, using FCC and Industry Canada approved SAR testing guidelines.

SAR Shield was developed using the P.A.M. SYSTEM® technology, applied to aerospace findings. The technology used in the SAR Shield is comparable to the electro-physical principles that make US Air force Stealth aircraft invisible to radar systems. The materials used in the construction of the SAR Shield withhold and dissipate electro-magnetic waves without reflecting them into the surrounding environment.

SAR Shield can be fitted quickly and simply to all cellular phones using a self-adhesive backing. The SAR Shield is metallic blue and silver, to complement the design of your phone.

With SAR Shield you can enjoy the convenience of a cellular phone without worrying about cellular phone radiation.

Also available:

  • Wire Guard: This is a reusable radiation suppression clamp-on device similar to a clamshell. This device clamps over the headset wire above the plug that is inserted into the phone. It incorporates a ferrous composition based material which interacts directly with the high frequency energy and suppresses it effectively while allowing the voice signal to pass through to the earpiece unimpeded. The housing is a black composite manufactured using nylon resins. Universal sized to fit any headset! The effect of magnetic material on a conductor current flowing through a conductor creates a magnetic field around it. Transfer of energy between the current and the magnetic field is effected through the "inductance" of the conductor - for a straight wire the self-inductance is typically 20nH per inch. Placing a magnetically permeable material around the conductor increases the flux density for a given field strength and therefore increases the inductance. Wires or cables connected/extended from electronic devices using radio waves (such as cell phones) if not shielded will emit over ambient rf radiation levels. To suppress high frequency rf radiation from interacting with sensitive electronics and biologic systems (cell phone users), we offer a line of clamp-on ferrites suppressors. Our ferrites aim to effectively shield the harmful electromagnetic fields from traveling along computers wires, electric wires and cell phone headsets wires ect. Using a cell phone with a hands free headset that is NOT shielded will dramatically increase rf radiation exposure to DNA within vital organs. All studies have proven in the likelyhood that microwave radiation from a cell phone handset is hazardous. Wire Guards help prevent the possible 300% increase in RF Exposure to the brain that can happen when not using a shielded headset! One other major concern of using a headset for hands free usage is where the phone itself is placed. When hands free use requires the phone is held near your body, proper body shielding must be used! Usage: 1. Position headset wire just above the plug into either 'V' Channel. 2. Close one side over the other, verify the wire passes through the opening on both sides and the side tabs lock. 3. To transfer to another headset, carefully open the side tabs using a small screwdriver.
  • Bluetooth Handsfree: Both mobile phones & Bluetooth devices emit non-ionizing radiation, typically at frequencies 1 ~ 2.5 GHz. The data on health hazards from this type of radiation are equivocal, with some studies showing a measure of risk & some showing no problems. But because it's a good idea to err on the side of caution in such matters, regulatory bodies have set exposure standards. Click on image to go to our Bluetooth Handsfree page for more info.
  • RFID Shield: Technology has always been a double-edged sword, and it now offers the capability where electronic thieves can silently download credit card and ID data through a process called "skimming." These modern day pick-pockets can access information without someone even being aware that their identity has been hijacked! Sensitive personal financial data is now being stored on many credit cards which are RFID (Radio Frequency Identification) enabled. Information that you definitely don't want to get into the wrong hands. This blocking material is a three layered electronic shield which is the size of a dollar bill and fits nicely in any wallet. Made in the USA, laboratory-tested and FIPS 201 approved. Also available in a sleeve format that houses your credit cards snug. WARNING: RFID Shield will trigger any security monitoring system alarm or any metal-detecting devices. Use also for your smart chip embedded passport. If you laminate these RFID Shields (cold or heated method) and place inside your mobile phone case, they help on diverting cellular radiation away from your body. Click here to see the full line of RFID-blocking wallets.

  • Home Safety SAR Shield :  
    (#xx)  SAR Shield
    (#xx)  Wire Guard
    (#xx)  RFID Shield
     DELIVERY: 1~2 weeks for SAR Shield & 2~3 weeks for the rest of items.
    RELATED PRODUCTS: Mobile Signal Amplifier.

    © Sigma Automotive - 267-645-6340 (fax)
    Home  |  Order Info  |  View Cart  |  Contact  |  Bookmark and Share

    Affiliated Sites:
      [  BOSSBi  |  Earthority  |  SigmaAuto  ] 

    See Us On:
    Facebook     MySpace     Twitter     YouTube